YPL Instruments Private Limited

External Chamber Level Switch is a robust and reliable device designed for detecting liquid levels in tanks or vessels, especially in applications where direct contact with the process medium is undesirable or impractical.

Displacer Level Switches are used to detect liquid levels in tanks or vessels, and they work based on the buoyancy principle.

YPL-TMLS03 Top Mounted Level Switch is a type of level sensor installed on the top of a tank or vessel to monitor and control liquid levels. 

YPL-VFLS08 Vibrating Fork Level Switch is a point level detection device used to detect the presence or absence of a material typically liquids, powders, or granular solids at a specific level in a tank, silo, or pipe.

RF level switches deliver peak performance at low cost. Based on Radio Frequency principle for Solids, Liquids, Slurries.It works on Radio Frequency Principle. Independent but identical low power RF signals equal in frequency, phase, and amplitude and wave shape generated in Electronic Controller are provided to active and shield sections of the Sensing Probe whereas , the reference ground of electronics is connected to the vessel shell

Liquid Level Switch is a reliable and cost-effective device used to detect and control the level of liquids within tanks, containers, or pipelines. It serves as a safety mechanism to prevent overflow, dry running, and to ensure proper fluid management in various industrial, commercial, and residential applications. The liquid level switch activates or deactivates a pump, valve, or alarm system depending on the liquid level in a given system, providing efficient fluid level control.

Side Mounted Level Switch (YPL-SMLS01) is designed for detecting liquid levels in tanks, vessels, and other containers, offering a reliable solution for applications in water, oil, fuels, chemicals, solvents, and

Cable Float Switch is a simple and cost-effective liquid level control device that operates based on the tilting action of a float suspended on a cable.

5 Inch Displacer Level Switch refers to a displacer-type level switch that uses a displacer element that’s approximately 5 inches long (or tall) to detect the level of a liquid in a tank or vessel.

Rotary Paddle Level Switch is a mechanical device used primarily for point-level detection in bulk solids like powders, grains, or granules stored in silos, hoppers, or bins.

Conductivity Level Switch is an electrical level-sensing device used mainly for detecting the presence or absence of conductive liquids (like water, acids, or caustics) at specific levels in tanks or vessels.